Almost done with the horizontal stabilizer

I got to do a good deal of work today on the horizontal stabilizer. I got everything riveted together except for the rear spar. I’ll shoot a coat of primer on that tomorrow and give it a day or two to cure. After that’s riveted on the horizontal stabilizer is done!

The assembly is going together really easy but I still manage to mess up a rivet or two here and there. Here is a photo of a line of rivets. I had to drill out one of them but the rivet had been over-driven so when I drilled through the rivet, it left a portion of the rivet still in the hole. My only option was to drill out the hole to #30 and use an “oops” rivet. An oops rivet has a shop head that is the same size as the other AN425AD3 rivets used on this assembly. But the shank of the rivet is the same size as an AN425AD4 which is one size larger. The upshot is you get to enlarge the hole but once you drive the rivet, it looks the same as all the others.

IMG_1648_a.JPG

Looks pretty much like all the other rivets, but if you guessed this one…

IMG_1653_a.JPG

You’re right!

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s